Aqua Jet Wash staff are CSCS card holders, IPAF qualified, ‘Working At Height’ and ladder trained. We are also very proud to be NHBC Safemark Accredited.
We can carry out full external building cleans using tried and tested cleaning methods, leaving your building fresh and clean. Whether it’s brick work, block work, or cladding, along with many other hard surface areas, we have the skill, experience & knowledge to deliver.
If you have a blocked drain or a blocked gutter, we can clear it along with everything in between. We have the equipment to complete any of the tasks, from jet washing to grit blasting and steam cleaning.
For access to higher working levels we have our own suppliers for equipment such as Cherry Pickers, Towers and Scaffolding to make access safe and easy.
Our watch word phrase is “work safe today to work again tomorrow”.
We typically provide services for:
Retail Shopping Areas
Car Parks / Tarmacked Areas
Brick & Block Cleaning
Our jet washer has the power to clean the mortar from the face of your brick or block work. The controllable pressure and jet types, along with our operator experience, ensures a high standard of clean is achieved without damage to joints.
Extension lances allow most 2 story buildings to be cleaned from ground level. We can, and do, where necessary, work from scaffolding as shown in our gallery. Our employees are fully trained at ‘Working At Height’. When completed, the cleaned brick and block work makes the property ready for the market.
Past projects range from, 1 bedroom bungalows to multi bedroom hotels and apartment blocks.
As a company we have invested in the most up to date equipment for our grit blasting contracts. The pressure and nozzle sizes can be adjusted along with the ability to do wet blasting where needed. Our machine will take all the modern abrasives, glass beads, plastic and stone grit expandable abrasive to achieve the finish required by the client. We are able to clean stone work and brick work, both internal and external of buildings.
If the brick work on your property has been painted and you want it returned to the original condition then we can do that for you. We can, of course, also clean metal, for example, lorry trailers, boats and structures to name but a few and being mobile we will come to you.
We can deal with graffiti removal in a number of ways depending on where it is and the surface it’s on and what has been used.
Some will wash off, some need a treatment applying and then washing, other areas may need grit blasting to remove it. We make an informed decision following a site survey and advise the client accordingly.
If the flow of water from your property has stopped or reduced, we have the equipment to clear the blockage.
From outside your property we can back flush to remove any obstructions or blockage with our high pressure water jetting machine. With a turbo nozzle, it not only breaks up the obstruction but washes the internal pipe work as well, leaving free flowing pipe work.
Facade & Cladding Cleaning
Aqua Jet Wash provide external cleaning for building surfaces including all types of cladding and brick work for commercial and industrial buildings, offices and residential buildings. We remove dirt and staining from building facades using jet washers and steam cleaners.
Working either at street level, aerial platforms or scaffolding. Our long experience working at height ensures that we provide a safe professional service at competitive rates.
A professional, clean appearance is vital to offices, shops, restaurants, hotels and pubs in order to attract customers. Using both low and high pressure cleaning equipment Aqua Jet Wash can clean all exterior surfaces including walls, roof tiles, cladding, facades and fascias.
Fire and smoke can leave a property in a poor state. The smoke smell can linger in the walls for years.
Our expert knowledge in cleaning and sealing to remove the odours left behind can help bring a property back to being habitable again and ready for re-decorating. The process we use is fully proven over many years. It can be applied to brick, block or wood.
Moss & Algae Removal
Hard surface areas are often damp & humid, this in turn, attracts moss, algae, lichen & liverwort. Not only is this unsightly but it can be very slippy & dangerous.
We will deep clean using a jet wash, followed by an application of an inhibitor to kill the algae root systems which will restrict the re-growth. Following the initial clean, we recommend a 12 monthly re-application of the inhibitor to prevent further growth, leaving your property looking clean and refreshed.
This method is used where dirt and grime need heat to remove it. Cleaning large areas and awkward corners and crevices is made a lot easier using steam. It can also be beneficial when dealing with graffiti, trodden in dirt and soiled areas.
No harsh chemicals are used in this cleaning process. This kills fungus, mould and bacteria. Other allergens are also killed in this process which creates no dust and is also effective on dirt, grease, oil and stubborn build up of stains. It can also be used on external heavily soiled cladding and coatings (subject to test area to ascertain suitability of coatings).